Aerojet Rocketdyne Highlights Successful Year Supporting DoD and NASA Missions
December 20, 2019 | GlobeNewswireEstimated reading time: 5 minutes
Here is a look at some of the company’s important accomplishments this year:
Ground Based Strategic Deterrent
Hypersonics
- Aerojet Rocketdyne successfully completed a series of subscale propulsion-system test firings as part of a Defense Advanced Research Projects Agency (DARPA) effort to develop a ground-launched hypersonic missile for tactical use. Aerojet Rocketdyne is designing propulsion concepts and technologies for DARPA’s Operational Fires program, a ground-launched tactical weapon system.
- Building upon its pioneering work in hypersonics, Aerojet Rocketdyne is supporting a Lockheed Martin effort to develop a hypersonic conventional missile for the U.S. Air Force under a subcontract valued at $81.5 million. Known as the Hypersonic Conventional Strike Weapon (HCSW), the air-launched, standoff weapon will be capable of traveling at more than five times the speed of sound.
- Aerojet Rocketdyne is maturing Axial Upper Stage component technologies and analytical tools to demonstrate component, material and architecture solutions to support future hypersonic development efforts under a Missile Defense Agency contract worth up to nearly $19 million.
Missile Defense
- In a first-of-its-kind flight test of the Missile Defense Agency’s (MDA) Ground-based Midcourse Defense program, Aerojet Rocketdyne’s Divert and Attitude Control System (DACS) supported Raytheon’s Exoatmospheric Kill Vehicle (EKV) in its intercept of an ICBM. The Aerojet Rocketdyne DACS helped to successfully maneuver an EKV to destroy the incoming target.
- Aerojet Rocketdyne Coleman Aerospace, Inc. completed a successful test, known as the Iron Bird Mission, of an air launch extraction and descent system as part of a contract to provide a new Medium Range Ballistic Missile target for MDA.
Investing in the Future
- Senior Aerojet Rocketdyne officials joined Arkansas State and local leaders to break ground on the newest and most modern solid rocket motor development facility in the nation. Expanding the company’s decades-long capability of solid rocket motor production in Camden, the Engineering, Manufacturing and Development facility was specifically designed to serve as the developmental gateway to future large solid rocket motor product opportunities, to include GBSD, hypersonics and missile defense targets.
- Senior Alabama State officials joined Aerojet Rocketdyne’s CEO Eileen Drake and Executive Chairman Warren Lichtenstein at ribbon-cutting ceremonies for the company’s Defense Headquarters and its new, state-of-the-art Advanced Manufacturing Facility (AMF). In addition to producing advanced propulsion products for U.S. defense and space programs to include the Standard Missile-3 and Terminal High Altitude Area Defense system, the AMF was designed to support new program opportunities including hypersonics and GBSD.
- The company successfully transitioned its energetics and final assembly of NASA’s Orion jettison motor to its Orange, Virginia, facility. The successful Orion Jettison Demonstration Motor 4 (DM-4) test at the Redstone Test Center in Huntsville, Alabama, marked a significant milestone in the company’s long-term affordability and utilization improvement initiative, the Competitive Improvement Program (CIP).
Innovative Advanced Manufacturing
- Aerojet Rocketdyne acquired 3D Material Technologies (3DMT), expanding the company’s additive manufacturing capacity and complementing its existing portfolio with a new, stand-alone production facility. Aerojet Rocketdyne continues to incorporate additive manufacturing into its rocket engines and defense applications to significantly reduce lead times, make products more affordable, and enable new approaches to design.
- One major success for the additive manufacturing team this year was successfully completing initial testing of a next generation RL10C-X. This next generation upper-stage rocket engine contains major components produced with the company’s industry-leading 3D printing technology.
- Aerojet Rocketdyne entered into a Space Act Agreement with NASA’s Marshall Space Flight Center to design and manufacture a lightweight rocket engine thrust chamber assembly using innovative additive manufacturing processes and materials. The goal of the project is to make a thrust chamber that is easily scalable to support a variety of missions, including America’s return to the Moon and subsequent missions to explore Mars.
Deep Space Exploration
- NASA has laid the groundwork to return Americans to the Moon by 2024 and Aerojet Rocketdyne will be a critical contributor on multiple facets of the historic endeavor. This year, Aerojet Rocketdyne completed acceptance testing of all 16 RS-25 engines and flight controllers needed to support the first four flights of NASA’s Space Launch System (SLS) and completed integration of the first set of engines for Artemis I, the first flight of SLS. Also in support of Artemis I, Aerojet Rocketdyne delivered the jettison motor for Orion’s Launch Abort System and qualified the motor for all future Artemis missions. Hardware for Artemis II has also started to be delivered to NASA, including eight auxiliary engines for integration into Orion’s European Service Module (ESM).
- Lockheed Martin awarded Aerojet Rocketdyne a contract to support production of NASA’s Orion spacecraft fleet for Artemis missions three through five with an option to support missions six through eight with three additional engine shipsets.
- The Advanced Electric Propulsion System (AEPS) thruster, developed by Aerojet Rocketdyne for the Power and Propulsion Element of NASA’s Gateway, demonstrated operation at full power for the first time, achieving an important program milestone for NASA’s orbiting lunar outpost for robotic and human exploration.
- Aerojet Rocketdyne was also awarded a contract by NASA to further investigate designs for a Lunar Transfer Vehicle under NASA’s new Artemis lunar exploration program.
Low Earth Orbit
- Astronauts installed new sets of Lithium-Ion (Li-Ion) batteries built by Aerojet Rocketdyne into the International Space Station’s power system. These batteries will provide twice the kilowatt-hours than their predecessors at a fraction of the mass, and are designed to operate for at least 10 years.
- The Starliner program conducted a successful Pad Abort Test, where the service module demonstrated its ability to separate itself from a simulated launch vehicle and propel itself and the crew module approximately one mile high and one mile downrange, and then separate from the crew module in a controlled manner using Aerojet Rocketdyne propulsion. Aerojet Rocketdyne propulsion hardware is featured on all phases of Starliner missions: from launch to on-orbit operations to atmospheric re-entry.
Military Satellite Launches
Access to Space and Space Operations
- Aerojet Rocketdyne and Firefly Aerospace, Inc. (Firefly) announced a cooperative agreement that combines the capabilities of both companies to provide flexible, sustainable and highly competitive space access solutions. This collaboration will leverage Firefly’s new family of launch vehicles and in-space services with Aerojet Rocketdyne’s experience in propulsion development, additive manufacturing and mission assurance for commercial, national security and exploration missions.
- Aerojet Rocketdyne, along with NASA, Ball Aerospace and the Air Force Research Laboratory (AFRL), launched the Green Propellant Infusion Mission, which is conducting a 13-month demonstration of a “green” propellant developed by the AFRL. The revolutionary mission is examining if this new propellant can improve overall efficiency while reducing the handling concerns associated with traditional spacecraft propellants.
- Aerojet Rocketdyne electric and chemical engines will play a key role in Northrop Grumman’s Mission Extension Vehicle (MEV). MEVs have the ability to extend the mission life of satellites by providing the propulsion and attitude control needed to extend their lives. The first MEV launched in 2019 and will service its host satellite for five years.
For more details on how Aerojet Rocketdyne is providing for a modern defense and pushing the boundaries of space exploration, and to follow along while we make history in 2020, visit www.rocket.com.
Suggested Items
Cogiscan Collaborates with Koh Young to Unveil How Factory Insights Software Transforms Data Into Action at IPC APEX EXPO
03/28/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, is excited to announce Factory Insights, the latest offering from Cogiscan, will be demonstrated alongside KSMART in Koh Young booth 2112 during IPC APEX Expo.
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
NextFlex Announces $5M Education Fundraising Effort: First Spotlight - Transforming the Landscape for Women in Technology
03/27/2024 | BUSINESS WIRENextFlex Learning Programs, the education-focused arm of the NextFlex® Hybrid Electronics Manufacturing Innovation Institute, announces its first spotlight effort, “NextFlex Supports Women in STEM” to increase the number of women in STEM fields, which could accelerate U.S. GDP growth by boosting women’s cumulative earnings by $299B and adding $5.9T to the global stock market within 10 years according to S&P Global.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
ACDi Takes Milestone Delivery of the 23,000th Koh Young Machine
03/26/2024 | ACDiAccording to ACDi (American Computer Development, Inc.), “Flexible, reliable, and equipped to keep your project on schedule, is what you need as an electronics manufacturing services partner.”
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in