-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Flexible Circuit Design Guidelines
March 5, 2020 | Flexible Circuit TechnologiesEstimated reading time: 1 minute
Flexible circuit designs share many of the same challenges of rigid PCB designs, but there are also many differences and additional challenges. The very nature of a flex circuit being able to bend and flex make it as much a mechanical device as an electrical one. This creates a special set of requirements unique to flexible circuitry. Understanding how these requirements interact will allow the PCB designer to create a flex circuit that balances the electrical and mechanical features into a reliable, cost-effective interconnect solution.
Overview
Scrutinize your design for stress concentration features. Stress concentration features are the single predominant cause for mechanical failures in flexible circuits (i.e., cracked/broken conductors, torn insulating material, etc.). To avoid stress concentration points, the construction of the circuit should not change in, or immediately adjacent to, the bend area. In a bend area, there should be no change of conductor width or thickness or direction, no termination of plating or coatings, no openings in covers or outer insulating materials, and no holes of any kind in a bend zone.
Bend Ratio
Determine and evaluate the minimum bend ratio of your design. This will be your single best indicator of whether your flex circuit may experience problems in service. Bend ratio is bend radius: circuit thickness.
To read this entire article, which appeared in the January 2020 issue of Design007 Magazine, click here.
Suggested Items
OE-A at LOPEC: Printed Electronics Powers Sustainability
02/06/2024 | OE-AThe “OE-A Competition 2024” shows the many possibilities of flexible, organic, and printed electronics with inspiring products, prototypes, and fresh designs live at LOPEC 2024, the leading international exhibition and conference for flexible, organic, and printed electronics in Munich.
All Flex Solutions Invests in New Flexible Circuit Facility
02/05/2024 | All Flex SolutionsAll Flex Solutions has started the equipment build-out of a completely new flexible circuit manufacturing facility in Minneapolis. The building was purchased in 2020, and was completely renovated to accommodate the company’s plans for a brand new state-of-the-art flexible circuit fabrication plant.
Flexible Printed Circuits: A Design Primer
12/19/2023 | Chris Keirstead, PFC Flexible CircuitsFlexible circuits consist of conductive strips in a sandwich of insulating or dielectric material. They resist moisture and contamination and are insulated from external shorts, with holes or contact surfaces for interconnection. Understanding a package’s electrical requirements and not over-designing permits means taking full advantage of a flexible circuit’s potential compared to conventional wiring.
Intel Technology Helps Power Solution for a More Resilient Grid
11/29/2023 | IntelAhead of Enlit Europe, Intel announced that its technology is helping power the Edge for Smart Secondary Substations (E4S) Alliance’s new solution to modernize the energy grid.
Würth Elektronik Launches Research Project HyPerStripes
11/27/2023 | Wurth ElektronikHyPerStripes project partners will create a technology platform including manufacturing techniques for roll-to-roll (R2R) processing as well as the integration of electronic components onto very long ("endless"), flexible and stretchable printed circuit boards.