-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Rework Challenges for Smartphones and Tablets
November 19, 2014 |Estimated reading time: 1 minute
Smartphones are complex, costly devices and therefore need to be reworked correctly the first time.
To meet the ever-growing demand for performance, the complexity of mobile devices has increased immensely, with 70% more packages now found inside a mobile device than just a few years ago. For instance, a 1080P HD camera with video capabilities is now available on most high-end smartphones or tablet computers, making their production more elaborate and expensive.
The printed circuit boards for these devices are no longer considered disposable goods, and their bill of materials start from $150, with higher-end smartphones going up to $238, and tablets well over $300.
The implementation of surface mount devices is crucial for smartphone manufacturers, offering increased component density and improved performance. For example, the newer style DDR memory integrated components use less power and work at twice the speed of former versions. It is not surprising that most component manufacturers now produce these surface mount devices as small as 1 mm square.
Mobile products generally use an epoxy underfill to adhere components to the printed circuit board to meet the mechanical strength requirements of a drop test. Reworking glued components is the most difficult application in the electronics industry, and must be addressed as a process.
Rework Challenges
The removal of a glued component from a PCB assembly requires a specific order of operations. The first step is to remove the glue fillet located between the component and the circuit board. Mobile products generally have many types of components glued to the PCB in order to meet the industry standards outlined in JESD22-B111 Board Level Drop Test Method of Components for Handheld Electronic Devices and JESD22-B110 Subassembly Mechanical Shock. The epoxy is applied to the components to prevent the common failure modes of cracks in the laminate, cracks near the intermetallic, and cracks in the bulk solder. The addition of the epoxy increases the robustness of the design and enhances reliability for the user.
Read the full article here.
Editor's Note: This article originally appeared in the November 2014 issue of SMT Magazine.
Suggested Items
Join The Murray Percival Co. at IPC APEX EXPO 2024
03/15/2024 | Murray Percival CompanyThe Murray Percival Company, the award-winning leading supplier to the Midwest’s electronics industry, is excited to announce their participation in the upcoming IPC APEX EXPO, scheduled for April 9-11 at the Anaheim Convention Center in Anaheim, CA.
The Shaughnessy Report: The Myriad Opportunities—and Challenges
03/12/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportIf you look at the current state of PCB design, there are a lot of positive indicators. We have almost full employment in this great career that appeals to the techie side of the brain as well as the artistic side. You can make good money as a designer without ever seeing the inside of a college. This segment is in constant flux. It’s challenging, and that’s part of what makes it fun. But there’s one big problem: There aren’t enough designers, and the problem is likely to get worse before it gets better.
Department of Defense to Expand Manufacturing of PCBA for Hypersonic Weapons
03/11/2024 | U.S. DoDThe Department of Defense announced an award of $11.7 million via the Defense Production Act Investment (DPAI) Program to Ensign-Bickford Aerospace & Defense (EBAD) that will provide additional printed circuit board assembly (PCBA) production capacity at their Simsbury, CT location. EBAD will increase existing capacity and manufacturing processes to reduce cost and accelerate PCBA production.
March 2024: Design007 Magazine Looks at Opportunities and Challenges
03/11/2024 | I-Connect007 Editorial TeamIn the March 2024 issue of Design007 Magazine, we asked our expert contributors to discuss the many challenges and opportunities in the PCB design community, and they shared their thoughts on what can be done to grow the numbers of PCB designers—and design instructors. Join us: We truly need your help. How do you think we can attract more young people into the PCB design segment?
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/08/2024 | Marcy LaRont, PCB007 MagazineIt may not officially be March Madness until March 17, but it feels pretty mad to me. Let’s just say it out loud: We are T-4 weeks to the IPC APEX EXPO. As I reviewed the big news of the week, I noticed quite a bit from mil/aero, and I recommend that you look for those headlines. But for now, I am more interested in the IPC Technical Conference and the ways that one engineer says you can get the most from your time spent at the show; Pete Starkey’s take on the world and European markets through the view of the EIPC keynote presenters; the reported growth in the global PCB market and the European EMS market; and what we are actually doing to remedy our workforce problems.