-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Component Selection for Easier Design and Manufacture of Electronics
December 17, 2014 | Joe Fjelstad, Verdant ElectronicsEstimated reading time: 1 minute
“Simplify, simplify, simplify.”
—Henry David Thoreau
Thoreau penned his simple lifestyle mantra more than 150 years ago and it still as valid today as it was when he first captured and recorded his thoughts on paper. He was not the first to extoll the importance of simplicity, but he said it in a memorable way.
Achieving simplicity has been deemed a worthy objective by many philosophers over centuries, and people often profess to seek simplicity in their lives. In the world of high tech, simplicity is arguably one of the foundational objectives of most of the technologies that surround us today. Certainly this is true in terms of how product designers are trying to create interfaces that allow even the most nontechnical users to get what they need from electronic products with a minimum of hassle.
However, that interface simplicity is undergirded by a massively complex electromechanical substructure of circuits, sensors and components. Pop open any high-end electronic device and you will be met by an impressive mass of densely packed components and circuits. Presently, those components are available in a wide array of formats, with a number of different lead shapes and forms along with the device’s mechanical outline. Presently, there are J-leads, I-leads, gull-wing leads, posts, balls and no leads at all. Mechanical outlines are generally square and rectangular, but the bodies can have a wide range of dimensions in X, Y and Z. While area array technology has helped to make things smaller, it has also upped the complexity factor from a design perspective by mixing grids and land shapes and sizes.
Why so many options? It is because there is not, nor has there ever been, a truly coherent approach to the process of selecting package structures for ICs or any other components for that matter. Yes, a roadmap for electronic component lead pitch was introduced with the advent of SMT, and that roadmap said that every next-generation lead pitch should be 80% of the size of the previous generation lead pitch.
Read the full article here.
Editor's Note: This article originally appeared in the November 2014 issue of The PCB Design Magazine.
Suggested Items
Altium to Exhibit Latest Innovations at Embedded World 2024
03/15/2024 | AltiumAltium (ASX: ALU), a global leader in electronics design systems, will be at Embedded World 2024 to reveal its latest innovations across its ecosystem, spanning Altium Designer,
OrCADX: High Performance That's Easy to Use
03/14/2024 | Andy Shaughnessy, I-Connect007During DesignCon, I spoke with Chris Banton of EMA about the newest developments around OrCADX, which provides PCB designers with more design automation capability across the whole design process in an easy-to-use GUI. As Chris says, this tool is designed for agile design teams, and features an updated PCB UX, an enhanced 3D engine, SolidWorks integration, and AI for a superior user experience.
Cadence Collaborates with Arm to Jumpstart the Automotive Chiplet Ecosystem
03/14/2024 | Cadence Design SystemsCadence Design Systems, Inc. announced a collaboration with Arm to deliver a chiplet-based reference design and software development platform to accelerate software-defined vehicle (SDV) innovation.
Happy’s Tech Talk #26: Balancing the Density Equation
03/14/2024 | Happy Holden -- Column: Happy’s Tech TalkPrinted circuit design and layout is a creative process that has profound implications for electronic products. With the need for more parts on an assembly, or the trend to make things smaller to be portable or for faster speeds, the design process is a challenging one. The process is one of “balancing the density equation” (Figure 1) with considerations for certain boundary conditions like electrical and thermal performance. Unfortunately, many designers do not realize that there is a mathematical process to the layout of a printed circuit
Seika Machinery to Present Solutions to Optimize Production Processes at APEX 2024
03/12/2024 | Seika Machinery, Inc.Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, is gearing up to showcase its latest advancements at Booth 4012 during the 2024 IPC APEX EXPO, slated to take place April 9-11, 2024 at the Anaheim Convention Center in California.