Tin Whiskers, Part 4: Causes and Contributing Factors


Reading time ( words)

In this installment of the tin whisker series, we'll take a look at causes and factors that have been found or are considered to contribute to the appearance of tin whiskers. In the remaining installments, we will address “Tin Whiskers - Plausible Theory,” “Tin Whiskers - Impact of Testing Conditions,” and “Tin Whiskers - Preventive and Mitigating Measures.”   

As all-encompassing tests to confirm or deny the culprits that cause tin whiskers are prohibitively costly and time-consuming, my thoughts focus on the logical causes and contributors. Fundamentally, the tin whisker follows the basic physical metallurgy in its principles on nucleation and crystal growth through the classic theories of dislocation dynamics and of other lattice defects in tin crystal structure. Thus, for whiskers to appear from the tin-plated (or tin-coated) surface, the causes and contributing factors should be intimately related to the nucleation sites creation and the subsequent growth paths after the coating process. However, for tin whisker due to tin’s intrinsic characteristics, the actual processes of nucleation and grain growth are dauntingly complex.

Nucleation and growth can be encouraged by stresses introduced during and after the plating process. The sources of these stresses come from multi-fronts. This includes residual stresses caused by electroplating and/or additional stresses imposed after plating, and/or the induced stresses by foreign elements, and/or thermally-induced stresses. Specific causes and contributing factors are outlined below.

Read the full column here.


Editor's Note: This column originally appeared in the March 2014 issue of SMT Magazine.

Share

Print


Suggested Items

SMTA Additive TechXchange Keynote: An Outlook on Advanced PCB Fab

10/20/2020 | Pete Starkey, I-Connect007
Organised as a virtual event by Lenora Clark of ESI Automotive and Tara Dunn of Omni PCB, SMTA’s Additive TechXchange addressed additive technology specifically in the context of the electronics industry. Pete Starkey details the keynote presentation, an outlook on advanced printed circuit board fabrication, from Jeff Doubrava, managing partner at Prismark Partners.

This Month in SMT007 Magazine: Indium Metal Forecast—Supply Chain Strong, Demand Continues to Grow

05/05/2020 | Donna Vareha-Walsh, Indium
Indium is a critical metal for the indium-tin oxide (ITO) market and other coating applications. Donna Vareha Walsh—director of sales and global supply chain and trade compliance at Indium Corporation—describes the plentiful global supply of indium and its recycling loop, examines indium’s history of price volatility and the market reactions from the recent Fanya Metal Exchange auction, and provides an overview of indium supply and demand drivers, as well as the impact of recycling efforts.

RTW IPC APEX EXPO 2019: ASM Updates Mid-Level Machines

02/06/2019 | Real Time with...IPC
ASM CEO Americas Jeffery L. Timms and Technica President and CEO Frank Medina give Nolan Johnson a product update on ASM's mid-speed machines—EbySIPLACE and EbyDEK. By bringing key features from ASM's high-end products to their new mid-level models, ASM's new machines are gaining attention Timms and Medina discuss the how and why.



Copyright © 2020 I-Connect007. All rights reserved.