Marcy's Musings: The Growing Industry
It’s Only Common Sense: Here’s What To Do After IPC APEX EXPO 2024
Dan’s Biz Bookshelf: Seeing the HoweSurface Breaking Down Barriers for Murrietta
June 5, 2015 | Real Time with...IPCEstimated reading time: Less than a minute
Murrietta Circuits is the first facility in North America successfully processing PCBs made with the eSurface technology. Andy Murrietta talks with Guest Editor Judy Warner about the key benefits, including greatly improved line geometry, trace tolerance, and peel strength.
To watch the video, click here.
Share on:
Suggested Items
Quiet Power: The Effect on SI and PI Board Performance
01/18/2024 | Istvan Novak -- Column: Quiet PowerIn signal and power integrity (SI and PI), we would ultimately like to see a reasonable agreement between the predicted or simulated and the measured performance of our circuits. Real-world measurements will always contain errors and usually show a distorted replica of the true behavior of the device under test (DUT). Real measurements always show more than just the behavior of the DUT. Even if we don’t consider random noise and random errors, in the measured data we have contributions from instrument, cable, and probe errors (just to name a few) that our calibration could not completely remove.
Connect the Dots: Five Best Practices for Designing Flex and Rigid-flex PCBs
01/09/2024 | Matt Stevenson -- Column: Connect the DotsFlex and rigid-flex PCBs represent exciting technology for designers. Suddenly, boards no longer need to exist along one plane—or along a flat plane at all. Designs can now conform to specific shapes or be bent during use, opening new possibilities for applications with space constraints or flexibility requirements.
Connect the Dots: Controlled Impedance and Calculations for Microstrip Structures
12/28/2023 | Matt Stevenson -- Column: Connect the DotsModern high-speed and RF PCB design is an exciting field but comes with its own set of challenges. Signal integrity, performance, and crosstalk become major concerns. Designers for these types of projects need to learn how to control electromagnetic interference (EMI) and compatibility (EMC), which means utilizing some interesting math and calculations.
#PurpleLightUp: AT&S Sets a Signal for Inclusion
12/04/2023 | AT&SThe International Day of Persons with Disabilities celebrates the important contributions made by people with disabilities in professional and private life.
SCHMID Group Pleased with productronica 2023
11/21/2023 | SCHMID GroupThe SCHMID Group, a global solution provider for the high-tech electronics, photovoltaics, glass and energy systems industries, is very pleased with the course of productronica in Munich.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in