-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Ten Considerations for Outsourcing PCB Designs
August 5, 2015 | Steve Dobson, Quadra SolutionsEstimated reading time: 2 minutes
Outsourcing your design work is a big deal. How do you know that the end-result will be as you envisaged? Will you have full control of your design? Will it be done to the quality you expect and within the time frame required?
Outsourcing can pose some fairly scary questions, so what are the key things to consider and what are the pitfalls to avoid?
1. Will outsourcing work for you?
Outsourcing of PCB design work is done by a wide variety of companies, in numerous industries ranging from one man operations to large design bureaus and equally there is no blueprint for the type of company that outsources or the reasons given.
Many small organisations may not have the capacity to employ PCB professionals or have sufficient design work to allow them to employ someone full-time. However, when new product development occurs, the need for these skills increases and, in order to innovate and adapt, these skills suddenly become a hot commodity. In these situations the ability to have these skills on-demand becomes a critical part of the potential success or failure of a project and outsourcing this crucial element can prove a worrying issue for many companies. However, many of the design bureaus and freelance designers can provide a vital lifeline in getting the product to market on time, keeping costs down and enabling small organisations to be lean and responsive to customer/client needs.
But outsourcing isn’t just for those organisations without in-house personnel. Often, outside PCB design support is sought by organisations because the skills required are beyond that of the in-house electronic design professionals. It is also the case that sometimes the in-house professionals require additional support and advice especially if they have had limited exposure to the latest industry developments in design, software or manufacturing. High-speed signals, matching track lengths and signal propagation varieties are just a few of the elements making PCB design more challenging. The complexity is often driven by the requirement for smaller and faster technology.
PCB design bureaus are also able to step in during periods of high turnover, multiple projects or periods of staff absence, holidays or during interim periods between full time staff. Whatever the reason behind considering PCB outsourcing, the reasons are neither new nor insurmountable. PCB design bureaus are accustomed to working to tight deadlines and fulfilling the required project specifications catering to a range of industries and criteria.
2. Hello, is it PCB you’re looking for?
First thing to understand is exactly where the sticking point lies, and what elements you actually need to consider outsourcing. Is it schematic entry and library work, component placement, track routing or is it the complete end-to-end process from design through to manufacture and testing?
When considering outsourcing it is important to consider how much work is required and the process. The five stages of design are: initial design review and integration; mechanical definition; placement and review; routing; and pre-delivery and review. All are all critical to the success of the job and these stages need to be understood by you and your PCB designer/bureau so that timescales, costs and design time can be factored in.
To read this entire article, which appeared in the July 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Altium to Exhibit Latest Innovations at Embedded World 2024
03/15/2024 | AltiumAltium (ASX: ALU), a global leader in electronics design systems, will be at Embedded World 2024 to reveal its latest innovations across its ecosystem, spanning Altium Designer,
OrCADX: High Performance That's Easy to Use
03/14/2024 | Andy Shaughnessy, I-Connect007During DesignCon, I spoke with Chris Banton of EMA about the newest developments around OrCADX, which provides PCB designers with more design automation capability across the whole design process in an easy-to-use GUI. As Chris says, this tool is designed for agile design teams, and features an updated PCB UX, an enhanced 3D engine, SolidWorks integration, and AI for a superior user experience.
Cadence Collaborates with Arm to Jumpstart the Automotive Chiplet Ecosystem
03/14/2024 | Cadence Design SystemsCadence Design Systems, Inc. announced a collaboration with Arm to deliver a chiplet-based reference design and software development platform to accelerate software-defined vehicle (SDV) innovation.
Happy’s Tech Talk #26: Balancing the Density Equation
03/14/2024 | Happy Holden -- Column: Happy’s Tech TalkPrinted circuit design and layout is a creative process that has profound implications for electronic products. With the need for more parts on an assembly, or the trend to make things smaller to be portable or for faster speeds, the design process is a challenging one. The process is one of “balancing the density equation” (Figure 1) with considerations for certain boundary conditions like electrical and thermal performance. Unfortunately, many designers do not realize that there is a mathematical process to the layout of a printed circuit
Seika Machinery to Present Solutions to Optimize Production Processes at APEX 2024
03/12/2024 | Seika Machinery, Inc.Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, is gearing up to showcase its latest advancements at Booth 4012 during the 2024 IPC APEX EXPO, slated to take place April 9-11, 2024 at the Anaheim Convention Center in California.