-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
ESI’s New Gemstone Changing the Rules for Laser
April 7, 2015 | Barry Matties, I-Connect007Estimated reading time: 6 minutes
I sat down at CPCA 2015 with ESI’s Mike Jennings, who explained the company’s newest addition: Gemstone, an ESI-designed and manufactured laser system, with 10,000 guaranteed hours, which is poised to change the rules in flex and other printed circuit processing. Jennings also discusses ESI’s new relationship with WKK, and an increased presence in China.
Barry Matties: Mike, start by telling us the news about the new Gemstone laser system.
Mike Jennings: We've added a new member to our 5335 family of laser processing systems, and it's called Gemstone. We're starting to get away from numbers and instead use names for our systems. We had a meeting with a customer in Germany that has a laser drill that we manufactured in 1996, which is still in production today, almost 20 years later. The durability of that lends itself to a family of products we're going to use in our business unit going forward: Cornerstone, Gemstone, and Keystone.
Matties: Regarding Gemstone, is it mainly tuned for the China market and the flex market?
Jennings: It's tuned for all markets. Because of the proprietary ESI-designed and manufactured laser, it changes the rules in flex circuit processing and in other PCB processing, for three reasons: the repetition frequency is three to four times faster; the efficiency of the pulse is so much higher; and we're using a squared temporal pulse as opposed to a Gaussian temporal pulse.
Matties: Can you explain that?
Jennings: Gaussian can be used to describe both the spatial pulse, which is the form in three dimension that the pulse takes in space; but there's also a temporal side, and the temporal side is the shape of the pulse as a function of power and time, with power being in Y and time being in X. Traditionally, the industry has used the word Gaussian pulse as an all-inclusive of both functions, because that's how it has been.
For the first time, we're taking a Gaussian spatial pulse in three dimensions, and we're using a squared temporal pulse. Rather than taking half of the pulse to rise to full power, and half to drop from full power, we rise to full power in less than one nanosecond, maintain full power for almost the full pulse width, and then fall in less than one nanosecond. Above the ablation threshold, which is really what does the work on a laser, you find that we have much higher time and higher energy above the ablation threshold, combined with faster frequency, resulting in much better throughput—between 10–15%, if not more.
Matties: Aside from the throughput, what's the advantage of your laser over mechanical? Why would someone go this route?Page 1 of 2
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: