MEMS Suppliers Ride Automotive Safety Wave
June 9, 2015 | IHSEstimated reading time: 3 minutes
Suppliers of MEMS-based devices rode a safety sensing wave in 2014 to reach record turnover in automotive applications, according to analysis from IHS (NYSE: IHS), the leading global source of critical information and insight.
Mandated safety systems such as Electronic Stability Control (ESC) and Tire Pressure Monitoring Systems (TPMS) – which attained full implementation in new vehicles in major automotive markets last year – are currently driving revenues for MEMS sensors. Those players with strong positions in gyroscopes, accelerometers and pressure sensors needed in these systems grew as well, while companies in established areas like high-g accelerometers for frontal airbags and pressure sensors for side airbags also saw success.
Major suppliers of pressure sensors to engines similarly blossomed - for staple functions like manifold absolute air intake and altitude sensing - but also for fast-growing applications like vacuum brake boosting, gasoline direct injection and fuel system vapor pressure sensing.
Bosch was the overall number one MEMS supplier with US$790 million of devices sold last year, close to three times that of its nearest competitor, Sensata (US$268 million). Bosch has a portfolio of MEMS devices covering pressure, flow, accelerometers and gyroscopes, and also has a leading position in more than 10 key applications. The company grew strongly in ESC and roll-over detection applications, and key engine measurements like manifold absolute pressure (MAP) and mass air flow on the air intake, vacuum brake booster pressure sensing and common rail diesel pressure measurement.
Compared to 2013, Sensata jumped to second place in 2014 ahead of Denso and Freescale, largely on strength in both safety and powertrain pressure sensors, but also through its acquisition of Schrader Electronics, which provides Sensata with a leading position among tire pressure-monitoring sensor suppliers.
While Sensata is dominant in TPMS and ESC pressure sensors, it also leads in harsh applications like exhaust gas pressure measurement. Freescale, on the other hand, is second to Bosch in airbag sensors and has made great strides in its supply of pressure sensors for TPMS applications.
Despite good results in 2014, Denso dropped two places compared to its overall second place in 2013, largely as a result of the weakened Yen. Denso excelled in MAP and barometric pressure measurement in 2014, but also ESC pressure and accelerometers. Denso has leadership in MEMS-based air conditioning sensing and pressure sensors for continuous variable transmission systems, and is also a supplier of exhaust pressure sensors to a major European OEM.
Secure in its fifth place, Analog Devices was again well positioned with its high-g accelerometers and gyroscopes in safety sensing, e.g. for airbag and ESC vehicle dynamics systems, respectively.
The next three players in the top 10, in order, Infineon, Murata and Panasonic, likewise have key sensors to offer for safety. Infineon is among the leading suppliers of pressure sensors to TPMS systems, while Murata and Panasonic serve ESC with gyroscope and accelerometers to major Tier Ones.
The top 10 represents 78 percent of the automotive MEMS market volume, which reached $2.6 billion in 2014. By 2021, this market will grow to $3.4 billion, a CAGR of 3.4 percent, given expected growth for four main sensors -- pressure, flow, gyroscopes and accelerometers. In addition, night-vision microbolometers from FLIR and ULIS and humidity sensors from companies like Sensirion and E+E Elektronik for window defogging will also add to the diversity of the mix in 2021.
DLP chips from Texas Instruments for advanced infotainment displays will similarly bolster the market further in future. More details can be found in the IHS Technology H1 2015 report on Automotive MEMS.
About IHS
IHS is the leading source of insight, analytics and expertise in critical areas that shape today’s business landscape. Businesses and governments in more than 150 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS is committed to sustainable, profitable growth and employs about 8,800 people in 32 countries around the world.
Suggested Items
BAE Systems and Eaton Expand Collaboration to Deliver Electric Drive Solutions for Heavy-Duty Trucks
05/08/2024 | PRNewswireBAE Systems, a leader in electric propulsion, and Eaton, a global power management company, are expanding their collaboration to include electric vehicle (EV) solutions for heavy-duty trucks.
OSI Systems Receives $6 Million Order for Electronic Assemblies
05/08/2024 | BUSINESS WIREOSI Systems, Inc. announced that its Optoelectronics and Manufacturing division has received an order for approximately $6 million to provide electronic assemblies to an advanced engineered solutions OEM.
Industrial PC Market Size to Record $1.75 Billion Growth from 2023-2027
05/03/2024 | PRNewswireThe global industrial pc market size is estimated to grow by USD 1.75 billion from 2023 to 2027, according to Technavio. This growth is expected to occur at a Compound Annual Growth Rate (CAGR) of almost 6.29% during the forecast period.
Real Time with… IPC APEX EXPO 2024: Sigma Engineering's Recycling and Regeneration Systems for PCB Etching
05/02/2024 | Real Time with...IPC APEX EXPOEvan Howard of Schmoll America interviews Kristoffer Bjorklund, Sigma Engineering's supply chain manager. We learn about Sigma's recycling and regeneration systems for PCB industry etching and the benefits and challenges of implementing these systems in existing factories.
QinetiQ Achieves UK’s First Jet-to-Jet Teaming Between Aircraft and Autonomous Drone
04/29/2024 | QinetiQQinetiQ has successfully trialled the UK’s first Crewed-Uncrewed-Teaming demonstration between a crewed aircraft and an autonomous jet drone.